Format; Default Settings - NanoCam Plus NCP-MIRDVRHD2 User Manual

Use the and
4.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.

3.2.3 Format

Formatting the Micro SD card will delete all information on the inserted Micro SD Card and prepare the card for use with the
Mirror DVR.
1. Press the button to stop the Mirror DVR from recording.
2. Press and hold the
3. Use the and
4. Use the
and
5. Press to confirm or cancel the SD card format operation.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. Formatting your Micro SD Card will delete all files from the card. Once these files have been deleted you will not be able to recover them.

3.2.4 Default Settings

Default Settings is used to revert the Mirror DVR settings to their default settings. To reset the camera to restore the default
settings, please follow the instructions below.
1. Press the button to stop the Mirror DVR from recording.
2. Press and hold the
3. Use the and
4. Use the and
5. Press
to confirm or cancel the default settings operation.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
buttons to highlight your preferred language and the
Button for 2 seconds to enter the Menu.
buttons to navigate the Menu and highlight the Format setting and press
buttons to navigate to CONFIRM or CANCEL.
Button for 2 seconds to enter the Menu.
buttons to navigate the Menu and highlight the Default Settings setting and press
buttons to navigate to CONFIRM or CANCEL.
button to confirm your selection.
to select.
to select.
15