Video Menu; Resolution; Loop Recording - NanoCam Plus NCP-MIRDVRHD2 User Manual

2.7 Video Menu

When the Mirror DVR is powered on the video screen will start by default. In this screen recording will automatically start and can be
stopped by pressing the
To access the Menu, ensure that the Mirror DVR is not recording then press and hold the

2.7.1 Resolution

Resolution sets the video quality. Higher resolution video will capture more detail and will also produce larger files. To change the
recording resolution, please follow the instructions below.
1. Press the
2. Press and hold the
3. Use the
4. Use the
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. Higher resolution clips will create larger files which will fill the Micro SD Card faster.

2.7.2 Loop Recording

Loop recording allows you to set the duration that the camera will record before creating a new clip. To set the clip length please
follow the instructions below.
1. Press the
2. Press and hold the
3. Use the
4. Use the
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. Selecting the OFF option will create the longest possible clip, in most cases depending on the set resolution and other factors this will be limited to 10MB.
3. To avoid filling the card quickly it is advised to use the 2 or 3 minute options.
10
button.
Button to stop the Mirror DVR from recording.
Button for 2 seconds to enter the Menu.
and Buttons to navigate the Menu and highlight the Resolution setting and press
and Buttons to highlight your desired resolution, then press the
Button to stop the Mirror DVR from recording.
Button for 2 seconds to enter the Menu.
and Buttons to navigate the Menu and highlight the Loop Recording setting and press
and Buttons to highlight your required clip length, then press the
button for 2 seconds.
to select.
button to confirm your selection.
to select.
button to confirm your selection.