Date Stamp; Setting Menu; Date / Time; Language - NanoCam Plus NCP-MIRDVRHD2 User Manual

3.1.4 Date Stamp

Date Stamp is used to stamp your photos with the date and time they were taken. To select your preferred date and time
format follow the instructions below.
1. Press the
2. Press and hold the
3. Use the
4. Press the
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. The Date Stamp setting is not used to set the cameras internal clock. To set the Date and Time, please see the Date/Time section of this manual.

3.2 Setting Menu

This menu is used to edit the Mirror DVR operational settings. This menu can be accessed by pressing and holding the
for 2 seconds while the Mirror DVR is idle and not recording. While in this menu the
button to select the highlighted setting.
3.2.1 Setting the Date/Time
Setting the Time and Date allows you to stamp your footage with the time as a reference.
1. Press the
2. Press and hold the
3. Use the
Use the
4.
5. To save the date and time and exit the menu, press the
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. Once the time and date is set it can be stamped onto your footage using the Date Stamp setting. To configure Date Stamp setting, please refer to the Date
Stamp section of this manual.

3.2.2 Language

The Language setting is used to select your preferred Language in the menus. To set the language follow the instructions below.
1. Press the
2. Press and hold the
14
3. Use the
button to stop the Mirror DVR from recording.
Button for 2 seconds to enter the Menu.
and buttons to navigate the Menu and highlight the Date Stamp setting and press
button to switch the setting between ON and OFF.
button to stop the Mirror DVR from recording.
Button for 2 seconds to enter the Menu.
and buttons to navigate the Menu and highlight the Set Date/Time setting and press
and buttons to edit the selected digit and the
button to stop the Mirror DVR from recording.
Button for 2 seconds to enter the Menu.
and buttons to navigate the Settings Menu and highlight the Language setting and press
and buttons are used to navigate and the
button to confirm and progress to the next field.
button.
to select.
button
to select.
to select.