Location And Function Of Parts And Controls; Front Panel - Sony BVM-X300 Operating Instructions Manual

Location and Function of Parts and Controls

Front Panel

  (headphones) jack
The audio signal which is selected by the input select
button is output in stereo sound.
The output audio can be changed in [Audio Setting]
(page 27) of the [User Configuration] menu.
 KEY INHIBIT button
You can turn the setting value protection on or off.
When the setting value is protected with key inhibit, the
value cannot be changed. To change the setting value,
turn protection off by pressing the button for more than
two seconds.
For details, see "Protection of the Setting Values"
(page 17).
 Input select buttons
Press to monitor the signal input to each connector.
SDI 4K button: To monitor the 4K signal through the
SDI IN connector. If you press the button that is
already used to monitor, the input setting is changed.
SDI 2K button: To monitor the 2K signal through the
SDI IN connector. If you press the button that is
already used to monitor, the input setting is changed.
OPTION1/OPTION2 button: For future function
expansion.
 Function buttons
You can turn the assigned function on or off.
The factory setting is as follows;
F1 button: [Mono]
F2 button: [Flicker Free]
F3 button: [Blue Only]
F4 button: [Internal Signal]
F5 button: [User Preset1]
F6 button: [User Preset2]
F7 button: [User Preset3]
You can assign various functions in [Function Button
Setting] (page 26) of the [User Configuration] menu.
The [Function Button Setting] menu can also be
displayed by pressing and holding the function button.
 Rotary encoder
APERTURE knob: Adjusts the picture sharpness.
Turn the knob to the right to make picture sharper and
turn it to the left to make the picture softer. This
adjustment is available while the indicator of the
MANUAL button below the knob is lit.
CHROMA knob: Adjusts the color intensity. Turn the
knob to the right to increase the intensity and turn to
the left to decrease it. This adjustment is available
while the adjustment menu is displayed or the
indicator of the MANUAL button below the knob is lit.
Location and Function of Parts and Controls
11