Download  Print this page

Sony BVM-X300 Operating Instructions Manual Page 28

Professional video monitor trimaster el 4k.
Hide thumbs

Advertisement

[Gamut Marker Setting]
Submenu
Setting
[Gamut Marker]
Turns the gamut marker [On]/[Off].
The zebra pattern can be displayed for
the signal outside of the targeted color
space while [ITU-R BT.2020] is selected
for [Color Space].
[Target]
Sets the targeted color space.
The zebra pattern can be displayed for
the signal outside of the selected color
space.
Notes
[Type]
[Area and Aspect Marker Setting]
[Marker Preset]
Displays the selected marker preset data.
28
Adjustment Using the Menus
[On]: Displays the gamut marker.
[Off]: Disables the gamut marker
function.
[ITU-R BT.709]
[DCI-P3]
The setting is available while [ITU-R
BT.2020] is selected for [Color
Space].
The setting does not depend on the
status of picture control functions
such as contrast, chroma or white
balance.
When the input signal which is
included the noise composition is
over the targeted color space, the
zebra pattern display may emphasize
the noise.
[Type1]: Displays the black zebra
pattern.
[Type2]: Displays the black & white
zebra pattern.
[Aspect Marker Setting]
Submenu
Setting
[Aspect Marker]
Sets whether or not to display the aspect
marker ([Off] or [On]).
[Aspect Mode]
Sets the aspect ratio of the aspect
marker.
You can select from [16:9], [15:9],
[14:9], [13:9], [4:3], [2.39:1], [2.35:1],
[1.85:1], [1.66:1], [1.896:1] or
[Variable].
[Aspect]
Sets the aspect ratio of the aspect
marker when [Variable] is selected in
[Aspect Mode].
Set to 1.00:1 to 3.00:1. (Default value:
[1.78]:1)
[Line]
Sets whether or not to display the line of
the aspect marker ([Off] or [On]).
[Thickness]
Sets the thickness of the aspect marker.
Set to 1 to 5 (dots). (Default value: [2])
[Color]
Sets the color of the aspect marker.
You can select from [White] (white),
[Red] (red), [Green] (green), [Blue]
(blue), [Yellow] (yellow), [Cyan] (cyan)
or [Magenta] (magenta).
[Intensity]
Sets the luminance of the aspect marker.
You can select from [High] (bright) or
[Low] (dark).
[Blanking]
Sets the blanking outside the area of the
aspect marker.
[Off]: Blanking is released.
[Black]: Sets blanking.
[Half]: Sets half blanking.
[Area Marker1 Setting]

Advertisement

Table of Contents

   Related Manuals for Sony BVM-X300

Comments to this Manuals

Symbols: 0
Latest comments: