Sony BVM-X300 Operating Instructions Manual page 29

Submenu Setting
[Area Marker1] Sets whether or not to display area
marker 1 ([Off] or [On]).
[Aspect Mode] Sets the aspect ratio of area marker 1.
You can select from [16:9], [15:9],
[14:9], [13:9], [4:3], [2.39:1], [2.35:1],
[1.85:1], [1.66:1], [1.896:1] or
[Variable].
Note
When [Variable(dots)] is selected in
[Area Size], the size of area marker 1 is
set in the pixels of the input signal and
the [Aspect Mode] setting becomes
invalid.
[Aspect] Sets the aspect ratio of area marker 1
when [Variable] is selected in [Aspect
Mode].
Set to 1.00:1 to 3.00:1. (Default value:
[1.78]:1)
[Area Size] Sets the size of area marker 1.
You can select from [80%], [88%],
[90%], [93%], [Variable(%)] or
[Variable(dots)].
[Width] Sets the width of area marker 1 when
[Area Size] is set to [Variable(%)] or
[Variable(dots)].
When [Variable(%)] is selected
Set to 050 to 100 (%). (Default
value: [080])
When [Variable(dots)] is selected
Set to 640 to 4096 (dots).
(Default value: [1024])
[Height] Sets the height of area marker 1 when
[Area Size] is set to [Variable(%)] or
[Variable(dots)].
When [Variable(%)] is selected
Set to 050 to 100 (%). (Default
value: [080])
When [Variable(dots)] is selected
Set to 360 to 2160 (dots).
(Default value: [576])
Submenu Setting
[Shape] Sets the shape of area marker 1.
You can select from [Shape A], [Shape
B] or [Shape C].
[Shape A]

[Shape B]

[Shape C]

Note
The size of the area differs depending
on the [Aspect Mode] setting.
With 1.896:1
80%
[Aspect Mode] is
set to [1.896:1]
With 4:3
80%
[Aspect Mode] is
set to [1.896:1]
[Thickness] Sets the thickness of area marker 1.
Set to 1 to 5 (dots). (Default value: [2])
[Color] Sets the color of area marker 1.
You can select from [White] (white),
[Red] (red), [Green] (green), [Blue]
(blue), [Yellow] (yellow), [Cyan] (cyan)
or [Magenta] (magenta).
[Intensity] Sets the luminance of area marker 1.
You can select from [High] (bright) or
[Low] (dark).
[Area Marker2 Setting]
Sets area marker 2. The set items are the same as for
[Area Marker1 Setting].
80%
[Aspect Mode] is
set to [4:3]
80%
[Aspect Mode] is
set to [4:3]
29
Adjustment Using the Menus