Removing The Limitation On Hdmi Video Output (Mon.chk); Selecting The Hdmi 4K Signal Format (4K Mode); Restoring The Default Settings (Init) - Yamaha aventage RX-AS710 Owner's Manual

Removing the limitation on HDMI video output
(MON.CHK)
MON.CHK••••YES
The unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jack.
Disable the monitor check function if you want to specify a resolution in "Resolution"
(p.110) when the unit cannot detect the TV's resolution or when you want to specify a
different resolution than the detected resolution.
Settings
Enables the monitor check function. (Outputs video signals with a
YES
resolution supported by the TV only.)
Disables the monitor check function. (Outputs video signals with a
SKIP
specified resolution regardless of compatibility with the TV.)
• Reset to "YES" if the unit becomes inoperable because video from the unit cannot be displayed on the TV
after "MON.CHK" has been set to "SKIP".

Selecting the HDMI 4K signal format (4K MODE)

4K MODE•MODE 2
Selects the format of signals input/output at the unit when HDMI 4K (60 Hz/50 Hz)
compatible TV and playback device are connected to the unit.
Settings
Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:4:4, 4:2:2 or 4:2:0 format.
MODE 1
Depending on the connected device or HDMI cables, video may not
be displayed correctly. In this case, select "MODE 2".
MODE 2 Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:2:0 format.
• When "MODE 1" is selected, use a high-speed HDMI cable that supports 18 Gbps.

Restoring the default settings (INIT)

INIT••••CANCEL
Restores the default settings for the unit.
Choices
VIDEO Restores the default settings for video configurations.
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
122
En