Selecting the pasta/noodle making program
•
Do not select the extrusion-only program before the dough mixing is
complete. Otherwise, this will damage the pasta and noodle maker
and its lifetime.
•
Do not disconnect the power cord before processing is complete. If
you have to stop processing, press the on/off button
the pasta and noodle maker and then disconnect the power cord
from outlet before performing other operations.
•
To better protect the lifetime of the appliance, it is recommended
the continuous working time be less than 45 minutes. You can restart
using the appliance after a 15 minute rest.
•
If you intend to use the appliance continuously, clean the shaping
disc with the supplied cleaning tool each time after each pasta/
noodle making session. For cleaning ease, do not soak the shaping
disc directly in water.
1
Connect the power plug to any 240V AC
outlet. The pasta and noodle maker will
sound once, and all indicators will flash
once. Press the power on/off button
to switch on the pasta and noodle
maker.
2
Based on the amount of flour, press the
servings button
~ 300g or
to make ~ 600g of fresh
pasta/noodle.
ENGLISH
16
Important
to select
to make
to turn off