Assembling - Philips HR2357/06 User Manual

Assembling

• Make sure to tighten the front panel knobs during assembly.
•
Make sure the appliance is not plugged in when assembling the
appliance.
1
Push the mixing chamber into the
appliance.
2
Point the mixing paddle to the hole in
the main unit. Insert the mixing paddle
all the way into the main unit.
3
Attach the disc holder onto the
appliance.
❶ Disc holder safety switch
❷ Disc holder safety switch lever
Note:
Check that the safety switch ❶ and
•
safety switch lever ❷ are set as shown
in the illustration to the right.
ENGLISH
10
Follow below assembling steps to
install the pasta and noodle maker.
Important
1
2