Folding The Handle; Removing The Mower From Storage - Lawn-Boy 10797 Operator's Manual

Folding the Handle

Upright Position
1. Step on the foot pedal and hold it down (Figure 55).
Figure 55
2. Move the handle to the upright position (Figure 56).
Figure 56
Forward Position
1. With the handle in the upright position, step on the
foot pedal and hold it down.
2. Move the handle all the way forward and loosen the
upper handle knob (Figure 57).
Figure 57
3. To unfold the handle, refer to Unfolding the Handle.
Removing the Mower from
Storage
1. Remove the spark plug and spin the engine rapidly using
the starter to blow the excess oil from the cylinder.
2. Install the spark plug and tighten it with a torque
wrench to 15 ft-lb (20 N⋅m).
3. Connect the wire to the spark plug.
19