Panasonic KX-TES824 Features Manual page 177

[Visualisation of Time Schedule]
Monday
00:00
Time Table
Day Lunch
Note that time service modes can be arranged as they are needed (for example, night mode can occur
in the morning and afternoon, if necessary) and not all time service modes need to be used in a time
schedule. Also note that day mode or night mode resumes automatically when lunch mode ends.
3.
Programming Items Using Time Service
The following programming items will be affected by the time service:
a)
Flexible Outward Dialling—Day/Night/Lunch [405-407]
b)
Flexible Ringing—Day/Night/Lunch [408-410]
c)
Delayed Ringing—Day/Night/Lunch [411-413]
d)
CO Line Mode—Day/Night/Lunch [414-416]
e)
DRD Ring Pattern 2 Extension Assignment—Day/Night/Lunch [427-429] (New Zealand only)
f)
DRD Ring Pattern 3 Extension Assignment—Day/Night/Lunch [430-432] (New Zealand only)
g)
DISA IRNA to BV—Day/Night/Lunch [438-440]
h)
TRS-COS—Day/Night/Lunch [601-603]
i)
Doorphone Ringing—Day/Night/Lunch [700-702]
j)
Door Opener—Day/Night/Lunch [703-705]
4.
Day/Night/Lunch Button
A flexible Direct Station Selection (DSS) button can customised as a Day, Night, or Lunch button by the
operator or manager.
These buttons can be used to switch the current time service mode.
Each button shows the current status as follows:
Light Pattern
Off
Red on
Note
Extension users can press the "#" key on their proprietary telephones (PTs) to display the current
time service mode.
Conditions
• The start times of each time service mode and end time of lunch mode can be specified through system
programming (
03:00 06:00 09:00
Night
Night
Day/Night/Lunch off
Day/Night/Lunch on
Time Service Start Time [007]).
12:00 15:00
Day Lunch Day
2.2 System Configuration—Software
Tuesday
18:00 21:00 00:00
Night
Status
Feature Guide 177