1.5.3.2
Line Preference—Outgoing
Description
Through personal programming, a proprietary telephone (PT) user can select the preferred method of
seizing a line (Line Preference—Outgoing) to be used each time the user goes off-hook.
Method
Idle Line
No Line
Prime Line
Conditions
•
A flexible CO button should be assigned as an Outside (CO) Line Access button (Single-CO [S-CO],
Group-CO [G-CO], or Other-CO [O-CO]) before selecting a line preference.
•
Setting a new line preference clears the previous line preference.
•
Line Preference Override
A user can override the preset line preference temporarily by pressing the desired Outside (CO) Line
Access button or INTERCOM button before going off-hook.
•
System programming determines the extension users that can make outside (CO) line calls in each
time service mode (
•
It is possible to specify which outside (CO) lines are connected to the PBX (
[400]). This prevents extension users from trying to select or making calls using outside (CO) lines that
are not connected.
User Manual References
3.1.2 Changing Personal Settings Using Programming Mode
When a user goes off-hook, an idle outside (CO) line is selected
automatically from among the assigned outside (CO) lines (
Designated Line Access [419]).
When a user goes off-hook, no line is selected. In order to make a call,
the user must select the desired line manually.
When a user goes off-hook, the preset line is selected automatically.
Flexible Outward Dialling—Day/Night/Lunch [405-407]).
1.5 Making Call Features
Description
CO Line Connection
Automatic
Feature Guide
51