Procedure For Tilting Down - Yamaha F4 Owner's Manual

1. Neutral position
3. To prevent steering movement, turn the
steering friction adjuster clockwise.
1. Steering friction adjuster
4. Tighten the air vent screw.
1. Air vent screw
5. When using a portable fuel tank, discon-
nect the fuel hose, and then install the
fuel joint cap. WARNING! When not us-
ing a portable fuel tank, make sure to
1
ZMU06749
1
ZMU06827
1
ZMU06751
install the fuel joint cap. Otherwise, in-
jury could result from striking the fuel
joint accidentally.
1. Fuel hose
2. Fuel joint cap
6. Hold the rear of the top cowling and fully
tilt the outboard motor up. Slightly lower
the outboard motor from the fully tilted up
position and fit the tilt support bar secure-
ly into the holder located on the clamp
bracket.
1
2
1. Tilt support bar
2. Holder
EMU39571

Procedure for tilting down

1. Slightly tilt the outboard motor up.
2. Slowly tilt the outboard motor down while
pulling the tilt support bar up.
Operation
[EWM02411]
1
2
ZMU06753
ZMU06829
44