Engine Shut-Off Cord (Lanyard); Engine Oil - Yamaha F4 Owner's Manual

Operation
EMU36483

Engine shut-off cord (lanyard)

Inspect the engine shut-off cord and clip for
damage, such as cuts, breaks, and wear.
1. Clip
2. Cord
EMU39383

Engine oil

1. Place the outboard motor in an upright
position (not tilted). NOTICE: If the mo-
tor is not level, the oil level indicated
on the dipstick may not be accurate.
[ECM01790]
2. Remove the oil filler cap and wipe the at-
tached oil dipstick clean.
31
ZMU06874
1
2
ZMU06873
1
1. Oil filler cap
2. Oil lubrication check window
TIP:
The oil lubrication check window does not in-
dicate the engine oil level. Use the oil lubrica-
tion check window to make sure that the
engine is being lubricated with oil while it is
running.
3. Install the oil filler cap and tighten it com-
pletely.
4. Remove the oil filler cap again and check
that the oil level on the dipstick is be-
tween the upper and lower marks. If the
oil level is not at the proper level, add or
extract oil until the oil is between the up-
per and lower marks.
1. Oil dipstick
2. Upper mark
3. Lower mark
5. Install the oil filler cap and tighten it com-
pletely.
2
ZMU06769
1
2
3
ZMU06737