EMU39881
Stopping boat
EWM02321
WARNING
Do not use the reverse function to slow
down or stop the boat as it could cause
you to lose control, be ejected, or impact
the load or other parts of the boat. This
could increase the risk of serious injury. It
could also damage the shift mechanism.
The boat is not equipped with a separate
braking system. Water resistance stops it af-
ter the throttle lever is moved back to idle. The
stopping distance varies depending on gross
weight, water surface conditions, and wind di-
rection.
EMU27821
Stopping engine
Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating at
high speed is not recommended.
EMU39412
Procedure
1.
Push and hold the engine stop button un-
til the engine stops completely. The en-
gine can also be stopped by pulling the
engine shut-off cord and removing the
clip from the engine shut-off switch.
1. Engine stop button
1. Engine shut-off switch
2. Cord
3. Clip
2.
Tighten the air vent screw on the fuel tank
cap.
1. Air vent screw
1
1. Air vent screw
3.
Align the fuel cock with the closed posi-
ZMU06726
tion.
Operation
3
1
2
ZMU06867
1
ZMU06751
40