Maintenance And Cleaning Instructions - Hoshizaki RTE-80SFA(-UK) Instruction Manual

III. MAINTENANCE AND CLEANING
INSTRUCTIONS
IMPORTANT
. B e f o r e c a r r y i n g o u t a n y c l e a n i n g o r
maintenance operations, unplug the unit.
2. Do not disassemble the unit further than
illustrated in Fig. .
3. D o n o t t o u c h o r w e t t h e m a c h i n e
compartment parts. This could result in
failure or breakdown.
1. INTERIOR/EXTERIOR
* Clean the interior and exterior at least once a
week for sanitary use.
* Clean off the interior and exterior with a soft
cloth soaked in cold or warm water containing
the proper amount of neutral cleaner and wrung
dry. Do not use a water jet to clean the machine
compartment.
* Chemical agents other than neutral cleaner
might cause damage to the interior and exterior
surfaces.
* The Door Gasket and its contact surface get
soiled easily. Clean every surface of these parts
thoroughly. Remnants of food will accelerate
aging.
* Use a cloth to wipe off any water staying inside
the cabinet.
2. AIR FILTER
IMPORTANT
To prevent deformation, do not wash the Air
Filter with hot water above 40°C.
A plastic mesh air filter removes dirt or dust from
the air, and keeps the Condenser from getting
clogged. As the filter gets clogged, the refrigerator/
freezer's performance will be reduced. Check the
filter at least twice a month. When clogged, use
warm water and a neutral cleaner to wash the filter.
Do not operate the unit with the Air Filter removed,
or the Condenser will get clogged, resulting in
failure.
) Remove the Air Filter from the Front Panel.
2) Wash the Air Filter carefully with cold or warm
water containing the proper amount of neutral
cleaner. Rinse and dry the Air Filter thoroughly.
3) To refit the Air Filter, put the two Tabs into the
bottom slots in the Front Panel, and tightly
attach the Air Filter over the entire slots by using
the magnet provided.
Slot
IV. BEFORE CALLING A SERVICE AGENT
IMPORTANT
. I n c a s e o f i n s u f f i c i e n t r e f r i g e r a t i o n
performance, move the stored foods into
another refrigerator/freezer to prevent their
deterioration.
2. When contacting a service company, let
them know the model name, serial number
(see Nameplate on the right interior wall),
date of installation (see Warranty Card) and
state of the trouble (ex. error code).
1. TROUBLES WITH ERROR CODE
INDICATION
When the Temperature Display Window on the
Operation Panel flashes alternately between an
error code and the cabinet temperature, check the
error code and follow the instructions below.
Flashing Error Code
5
ENGLISH
Front Panel
Tab
Magnet
Air Filter
Fig. 9
Fig. 10