Operations - Televes DIGIDOM 7167 User Manual

Operations

1.- Turn ON the Transmitter (TX) and Receiver (RX) power
2.- Power ON the A/V sources and A/V display.
3.- Adjust the A/V Channel by combining the back switches.
Switch the Channel selector of Transmitter (TX) and Receiver (RX)
to the same channel.
4.- IR Extender.
Make sure the IR Extender mouse put in front of the A/V source's IR Sensor.
5.- A/V Loop Through Connection.
If you want to watch the program from the A/V source at the room of Transmitter (TX) loca-
ted, you just need to connect the Transmitter (TX) to TV display by the SCART cable (FEMA-
LE side)
The product designed in loop through connection enables an audio video to be looped
through various devices without using external splitters. As diagram shown below, A/V sour-
ces 1 can transmit audio video signals to both Transmitter (TX) and A/V Display at the same
time, you and your family will concurrently enjoy the program either in living room or in dining
room.
MALE side for
A/V source
ON
POWER
OFF/ON
1 2 3
ID/CH SET
DC 9V
A/V Sources
FEMALE side
for A/V display
CH1 On
CH2 On
CH3 On
CH4 On
CH5 Off
A/V channel
CH6 Off
ON CH7 Off
R
N
1 2 3
CH8 Off
ID/CH SET
ON
POWER
OFF/ON
1 2 3
ID/CH SET
DC 9V
Loop through
1 2 3
On On
On Off
Off On
Off Off
On On
On Off
Off On
Off Off
Transmitter
A/V Display
Transmitter
33
EN