Outback Power Systems FLEXnet DC User Manual page 20

A: 0.1A
B: 0.0A
C: 0.0A
DOWN
A: -1AH
B: 0AH
C: 0AH
DOWN UP
METER/DC/SHUNT A
removed
12AH
DOWN UP
METER/DC/SHUNT A
charged
12AH
DOWN UP
METER/DC/SHUNT B
removed
DOWN UP
METER/DC/SHUNT B
charged
AH
DOWN UP
19
The fi rst METER screen shows the amount of instantaneous
0.000 kW
0.000 kW
current running through each shunt. A positive value
0.000 kW
indicates current fl ow into the battery; a negative value
STATUS
means a load is being supplied. Press the <DOWN> soft key
to view the AH and kWH (amp hour and watt hour) screen.
The second METER screen shows the accumulated amp hours
0.100kWH
0.000kWH
and kilowatt hours for each shunt. Press the <DOWN> soft
0.O00kWH
TOP key to view the next METER screen.
This screen shows the number of removed amp hours and
watt hours as measured by SHUNT A. Press the <DOWN>
0.030kWH
TOP
soft key to view the SHUNT A charged screen.
The fourth meter screen displays the number of charged amp
hours and watt hours as measured by SHUNT A. Press the
0.160kWH
TOP <DOWN> soft key to view the fi rst SHUNT B METER screen.
Pressing the <DOWN> soft key brings up the SHUNT B
AH 0kWH
TOP
charged screen.
Pressing the <DOWN> soft key brings up the fi rst SHUNT C
0kWH
METER screen.
TOP