Declaration Of Conformity - Outback Power Systems Inverter/Charger FX2012ET Installation And Programming Manual

EU Declaration of Conformity
Product Type:
Product Model Numbers: FX2012E, VFX2612E, FX2024E, VFX3024E, FX2348E, VFX3048E,
These products comply with the following EU directives:
Electromagnetic Compatibility 89/336/EEC, "Council Directive of 3 May 1989
On the approximation of the laws of member States relating to Electromagnetic compatibility"
Low Voltage Directive 73/23/EEC, "Council Directive of 19 February 1973 on the harmonization of the
laws of Member States relating to electrical equipment for use within certain voltage limits"
The compliance of the above mentioned products with the directives and the following essential requirements
is hereby confirmed when installed off-grid.
Emissions and Immunity
EN 61000-3-2: 2000
EN 61000-6-3: 2001
EN 61000-6-1: 2001
EN 61000-3-3: 1995
All associated technical files are located in the Engineering Department at OutBack Power Systems Inc.,
Arlington, Washington, USA.
As the manufacturer we declare under our sole responsibility that the above mentioned product complies with
the above named directives.
Robin Gudgel
President
Copyright 2003 OutBack Power Systems, Inc.
nd
19009 62 Ave NE, Arlington WA 98223 USA
Tel 360 435 6030 Fax 360 435 6019
According to ISO / IEC Guide 22 and EN 45014
Power Inverter/Charger
Arlington, WA, USA 03-August-2003
Place and Date
nd
19009 62
FX & VFX "E" Series Inverter/Charger System

DECLARATION OF CONFORMITY

Safety
EN 60950-1: 2002
Ave NE Arlington, WA. 98223 USA
900-0027-2
Rev 7.1
06/08/06
Installation & Programming Manual
Page 5