Eu Declaration Of Conformity - Outback Power Systems FX2024ET Installation Manual

EU DECLARATION OF CONFORMITY

According to ISO / IEC Guide 22 and EN45014
Product Type: Inverter/Charger
Product Model Numbers:
• FX2012ET • FX2024ET • FX2348ET • VFX2612E • VFX3024E • VFX3048E
The OutBack Power Systems FX Series Inverter/Chargers export ("E") models comply with the following
EU directives when installed in off -grid applications only:
• EU Declaration of Conformity regarding Electromagnetic Compatibility 89/336/EEC ("Council
Directive of 3 May 1989")
• Low Voltage Directive 73/23/EEC ("Council Directive of 19 February 1973").
The compliance of the above-mentioned products with the directive and the following essential
requirements is hereby confi rmed:
Emissions Immunity Safety
EN 61000-6-3 (2001) EN 61000-6-1 (2001) EN 61000-3-2 (2000) EN 61000-3-3 (1995)
These inverter/chargers are not to be connected to the mains under any circumstances.
The AC-IN connection on each E model inverter/charger is only approved for connection to an AC
generator.
All associated technical fi les are located in the Engineering Department at OutBack Power Systems, Inc.,
Arlington, Washington, USA.
As the manufacturer, we declare under our sole responsibility that the above-mentioned products
comply with the above-named directives.
19009 62nd Ave. NE
Arlington, WA. 98223 USA
(360) 435-6030
2