Soft' Keys - Outback Power Systems Inverter/Charger FX2012ET Installation And Programming Manual

'SOFT' KEYS

The four buttons under the LCD are referred to as the 'soft' keys. Their operation is dependent on what their label says. The label is the
word on the bottom line of the LCD directly above the button.
Soft keys used to navigate the menus are commonly labeled <UP>, <DOWN>, <NEXT>, <BACK>, or <TOP>.
Soft keys that change settings are labeled either with the change they will make, such as : <OFF>, <AUTO>, and <ON>, or if there are
more than a couple values that the setting can be changed to, <INC> and <DEC> are used to mean increase and decrease,
respectively.
SETUP/FX/INPUT---P00
ac transfer
control
DOWN GRID GEN
SETUP/FX/INPUT---P00
Input setup
completed
TOP SETUP
SETUP/FX/INPUT---P00
ac transfer
control
DOWN GRID GEN
SETUP/FX/INPUT---P00
ac1/grid 24.0 aac
limit
DOWN INC DEC
ADV/FX/AUX-------P00
aux output
function
DOWN INC DEC
Copyright 2003 OutBack Power Systems, Inc.
nd
19009 62 Ave NE, Arlington WA 98223 USA
Tel 360 435 6030 Fax 360 435 6019
GEN
PORT
MAIN
GEN
PORT
PORT
CoolFan
PORT
FX & VFX "E" Series Inverter/Charger System
MATE - SYSTEM CONTROLLER AND DISPLAY
In this example, pressing <DOWN> will take you to the next set point screen in
the SETUP/FX/INPUT menu.
In this example, pressing <TOP> will take you to the first screen in the
SETUP/FX/INPUT menu. <SETUP> will return you to the SETUP/FX screen,
and <MAIN> will take you back to the Main screen.
In this example, pressing <GRID> will change the FX AC transfer control to
GRID mode. Conversely, pressing <GEN> will change the FX AC transfer
control to GEN mode.
In this example, pressing <INC> or <DEC> will change the numerical value of
the ac1/grid limit setting.
In this example, there are multiple operating modes for the aux output function.
Pressing <INC> or <DEC> will cycle through the available modes.
900-0027-2
Rev 7.1
06/08/06
Installation & Programming Manual
Page 31