Ricoh Pro 8100s User Manual page 221

Messages
"No response from the
scanner."
"No response from the
scanner."
"Scanner is in use for other
function. Please wait."
"Scanner is not available on the
specified device."
"Scanner is not ready. Check
the scanner and the options."
"The name is already in use.
Check the registered names."
When there is a problem connecting to the scanner
Messages
"Cannot connect to the scanner.
Check the network Access Mask
settings in User Tools."
Messages Displayed When Using the Scanner Function
Causes
The machine or client computer
is not connected to the network
correctly.
The network is crowded.
A function of the machine other
than the Scanner function is
being used such as the Copier
function.
The TWAIN scanner function
cannot be used on this machine.
The ADF cover is open.
You tried to register a name that
is already in use.
Causes
An access mask is set.
Solutions
• Check whether the
machine or client computer
is connected to the network
correctly.
• Disable the client
computer's own firewall.
For details about firewall,
see Windows Help.
Wait for a while, and then try to
reconnect.
• Wait for a while, and then
reconnect.
• Cancel the job that is
being processed. Press the
[Stop] key. Follow the
instructions in the message
that appears and exit the
function that is running.
Contact your service
representative.
Check whether the ADF cover is
closed.
Use another name.
Solutions
For details about an access
mask, contact your
administrator.
213