Ricoh Pro 8100s User Manual page 180

9. Troubleshooting
Problems
The function does not run or
cannot be used.
Paper is bent.
The print image is not properly
positioned on the paper.
The print image is not properly
positioned on the paper.
Paper delivered to the high
capacity stacker is curled,
causing it to not align properly.
172
Causes
The function cannot be
performed while the Address
Book is being backed up from
Web Image Monitor or other
tools running on the computer.
Paper may be bent when it is
ejected from the finisher upper
tray.
The machine has not detected
the paper type and/or width
correctly.
The print position is not aligned
properly.
Paper is curled.
Solutions
Wait a while. When the
Address Book backup is
complete, the function will be
performed.
Change the output tray to the
finisher shift tray.
Contact the machine
administrator or your service
representative.
Contact the machine
administrator or your service
representative.
• When the paper is curled
downward, select [Adjust
Curl: Weak] or [Adjust
Curl: Strong] under
[Adjust Paper Curl] in
"Adjustment Settings for
Operators".
• When the paper is curled
upward, select [Adjust
Curl: Weak] or [Adjust
Curl: Strong] under [Adjust
Paper Curl] in "Adjustment
Settings for Operators".
For details about the Adjustment
Settings for Operators, see
"Adjustment Settings for
Operators", Paper Settings .