Ricoh Pro 8100s User Manual page 118

8. Adding Paper and Toner
3. Press the elevator switch on the multi bypass tray (Tray 7).
1. Elevator switch
The lamp of the elevator switch is blinking while the tray is going up, and keeps lit when it stops.
Press the elevator switch to move down the tray if you want to either add paper or remove jammed
ones.
• Pull the extender out when loading A4 , 8
(Tray 7).
• Letterhead paper must be loaded in a specific orientation. For details, see page 118 "Loading
Orientation-fixed Paper or Two-sided Paper".
• You can load envelopes into the multi bypass tray (Tray 7). Envelopes must be loaded in a specific
orientation. For details, see page 143 "Envelopes".
• Specify the sizes of paper that are not automatically detected. For details about the sizes that can
be detected automatically, see page 122 "Recommended Paper Sizes and Types". For details
about how to specify sizes, see "Changing to a Size That Is Not Automatically Detected", Paper
Specifications and Adding Paper
• When copying from the multi bypass tray (Tray 7), see "Copying from the Multi Bypass Tray (Tray
7)", Copy/ Document Server
110
CWW312
1 1
CWW313
1
/ × 11 or larger sheets in the multi bypass tray
2
.
.