Xerox DocuPrint 4635 Laser System Generation Manual page 36

SYSGEN AND SYSGEN-RELATED PROCEDURES
Steps to perform a full sysgen (continued)
Step Action
10. Enter the system ID record of up to
30 characters and press <ENTER>
11. Enter N and <ENTER>.
12. Key in SYSGEN and press <ENTER>
13. Enter N and <ENTER> to allow the
sysgen to continue. Go to step 15.
14. Enter Y and <ENTER> to allow the
previously entered ID to be changed.
Key in the new ID and press
<ENTER>.
NOTE: When you enter N, sysgen
will continue. If you enter Y,
you will be able to change the
system ID again.
15.
If configured,
address provided by Xerox and press
<ENTER>.
16.
Enter Y or N and <ENTER>. A Y
and <ENTER> response causes the
change menu to display. Each time a
change is made, the change question
is asked until an N and <ENTER> is
entered, and the sysgen program
continues.
4-8
System response
System ID IS: xxxxx
Do you want to enter a new system id? 'y' or 'n'
Initializing disk drive 0
Creating file
Creating file
Creating file
Creating file
ENTER CMD ('C' FOR MENU)>
* Sysgen program running *
Do you want to enter a new system id? 'y' or 'n'
....*....*....*....*....*....*
>
Do you want to enter a new system id? 'y or 'n'
Enter Ethernet Network Address
enter the Ethernet
>
The base configuration and the system configuration
options are displayed followed by:
Do you wish to make any changes? Enter 'y' or 'n'
>
(the ID record that you just
entered.)
BITMAP
MSBLK
BADBLK
CECYL
System ID is: xxxxx
Enter system ID of up to 30 characters
System ID IS: xxxxx
XEROX 4635 LASER PRINTING SYSTEM—SYSTEM GENERATION GUIDE
.$Y$ on drive 0
.$Y$ on drive 0
.$Y$ on drive 0
.$Y$ on drive 0