Sending A Fax Manually - Samsung SCX-465 Series User Manual

Basic faxing
4 Enter the destination fax number (see "Keypad letters and numbers" on
page 166).
5 Press (Start) on the control panel. The machine starts to scan and
send the fax to the destinations.
• If you want to send a fax directly from your computer, use
Network PC Fax (see "Sending a fax in the computer" on page 191).
• When you want to cancel a fax job, press
machine starts transmission.
• If you used the scanner glass, the machine shows the message asking to
place another page.

Sending a fax manually

Perform the following to send a fax using
panel.
Samsung
(Stop/Clear) before the
1
2
3
4
5
6
If your machine is a handset model, you can send a fax using the handset
(see "Variety feature" on page 10).
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 49).
Select (fax) on the control panel.
Adjust the resolution and the darkness to suit your fax needs (see
"Adjusting the document settings" on page 67).
Press (On Hook Dial) on the control panel or lift the handset.
Enter a fax number using the number keypad on the control panel.
Press (Start) on the control panel when you hear a high-pitched fax
signal from the remote fax machine.
(On Hook Dial) on the control
2. Menu Overview and Basic Setup
65