Basic Scanning - Samsung SCX-465 Series User Manual

Basic scanning

For special scanning features, refer to the Advanced Guide (see "Scan
features" on page 182).
19
Basic Scanning
This is the normal and usual procedure for scanning originals.
This is a basic scanning method for USB-connected machine.
• It may be necessary to press
some models.
• If you want to scan using the network, refer to the Advanced Guide (see
"Scanning from network connected machine" on page 183).
1 Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 49).
2 If your machine has a
(scan) > Scan to PC on the control panel.
OR
Press Scan to on the control panel.
OK to navigate to lower-level menus for
(scan) button on the control panel, Select
If you see Not Available message, check the port connection, or select
Enable Scan from Device Panel in Samsung Easy Printer Manager >
Switch to advanced mode > Scan to PC Settings.
Select the scan destination you want and press OK.
3
Default setting is My Documents.
• You can create and save the frequently used settings as a profile list. Also
you can add and delete the profile and save each profile to a different
path.
Samsung Easy Printer Manager >
• To change the
advanced mode > Scan to PC
Select the option you want and press OK.
4
5 Scanning begins.
Scanned image is saved in computer's C:\Users\users name\My
Documents. The saved folder may differ, depending on your operating
system or the application you are using.
Switch to
Settings.
2. Menu Overview and Basic Setup
63