Ipv6 Configuration - Samsung SCX-465 Series User Manual

IPv6 configuration

IPv6 is supported properly only in Windows Vista or higher.
• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7
overview" on page 33).
• If the IPv6 network seems to not be working, set all the network setting
to the factory defaults and try again using
In the IPv6 network environment, follow the next procedure to use the IPv6
address.
10
From the control panel
Connect your machine to the network with a network cable.
1
Turn on the machine.
2
3 Print a Network Configuration Report that will check IPv6 addresses
(see "Printing a network configuration report" on page 136).
4 Select Start > Control Panel > Printers and Faxes.
5 Click Add a printer in the left pane of the Printers and Faxes windows.
6 Click Add a local printer in the Add Printer windows.
or "Menu
Clear Setting.
7 The Add Printer Wizard window appears. Follow the instructions in the
window.
If the machine does not work in the network environment, activate IPv6.
Refer to the next section followed by.
Activating IPv6
1 Press the (Menu) button on the control panel.
2 Press Network > TCP/IP (IPv6) > IPv6 Activate.
3 Select On and press OK.
4 Turn the machine off and turn it on again.
5 Reinstall your printer driver.
2. Using a Network-Connected Machine
146