Installing The Driver Locally - Samsung SCX-465 Series User Manual

Installing the driver locally

A locally connected machine is a machine directly attached to your computer
using the cable. If your machine is attached to a network, skip the following
steps below and go on to installing a network connected machine's driver (see
"Installing driver over the network" on page 139).
• If you are a Mac or Linux operating systems user, refer to the "Installation
for Mac" on page 130 or
• The installation window in this
machine and interface in use.
• Selecting Custom Installation
install.
• Only use a USB cable no longer than 3 meters (118 inches).
15
Windows
1 Make sure that the machine is connected to your computer and
powered on.
If the "Found New Hardware Wizard" appears during the installation
procedure, click Cancel to close the window.
2 Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click Start > All programs >
Accessories > Run.
"Installation for Linux" on page 132.
User's Guide may differ depending on the
allows you to choose which programs to
X:\Setup.exe replacing "X" with the letter, which represents your CD-
ROM drive and click OK.
3 Review and accept the installation agreements in the installation
window. Then, click Next.
4 Select USB connection on the Printer Connection Type screen. Then,
click Next.
Follow the instructions in the installation window.
5
30
1. Introduction