Wired Network Setup - Samsung SCX-465 Series User Manual

Wired network setup

4
Printing a network configuration report
You can print Network Configuration Report from the machine's control panel
that will show the current machine's network settings. This will help you to set
up a network.
• Press the (Menu) button on the control panel and select Network >
Network Conf. (Network Configuration).
Using this Network Configuration Report, you can find your machine's MAC
address and IP address.
For example:
• MAC Address: 00:15:99:41:A2:78
• IP Address: 169.254.192.192
5
Setting IP address
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 24).
• TCP/IPv6 is not supported by this program.
First, you have to set up an IP address for network printing and managements.
In most cases a new IP address will be automatically assigned by a DHCP
(Dynamic Host Configuration Protocol) server located on the network.
IPv4 configuration using SetIP (Windows)
Before using the SetIP program, disable the computer firewall from Control
Panel > Security Center > Windows Firewall.
1 Install this program from the supplied CD-ROM by double-click
Application > SetIP > Setup.exe.
Follow the instructions in the installation window.
2
Connect your machine to the network with a network cable.
3
4 Turn on the machine.
5 From the Windows Start menu, select All Programs > Samsung
Printers > SetIP > SetIP.
2. Using a Network-Connected Machine
136