Samsung SCX-465 Series User Manual page 144

Installing driver over the network
9
UNIX
• Make sure your machine supports the UNIX operating system before
installing the UNIX printer driver (see "Operating System" on page 7).
• The commands are marked with ", when typing the commands, do not
type ".
• Some features and optional goods may not be available depending on
model or country (see "Operating System" on page 7).
To use the UNIX printer driver, you have to install the UNIX printer driver
package first, then setup the printer. You can download the UNIX printer driver
package from the Samsung website (http://www.samsung.com > find your
product > Support or Downloads).
Installing the UNIX printer driver package
The installation procedure is common for all variants of UNIX OS mentioned.
1 From the Samsung website, download and unpack the UNIX Printer
Driver package to your computer.
2 Acquire root privileges.
"su -"
Copy the appropriate driver archive to the target UNIX computer.
3
See administration guide of your UNIX OS for details.
Unpack the UNIX printer driver package.
4
For example, on IBM AIX, use the following commands.
"gzip -d < enter the package name | tar xf -"
5 Go to the unpacked directory.
6 Run the install script.
"./install"
install is the installer script file which is used to install or uninstall the
UNIX Printer Driver package.
Use "chmod 755 install" command to give the permission to the
installer script.
7 Execute the ". /install –c" command to verify installation results.
Run "installprinter" from the command line. This will bring up the Add
8
Printer Wizard window. Setup the printer in this window referring to
the following procedures.
2. Using a Network-Connected Machine
144