Sending A Fax To Multiple Destinations; Sending A Fax Manually - Samsung Xpress M207x series User Manual

Basic faxing
4 Enter the destination fax number (see "Keypad letters and numbers" on
page 206).
5 Press (Start) on the control panel. The machine starts to scan and
send the fax to the destinations.
• If you want to send a fax directly from your computer, use
Network PC Fax (see "Sending a fax in the computer" on page 232).
• When you want to cancel a fax job, press
machine starts transmission.
• If you used the scanner glass, the machine shows the message asking to
place another page.

Sending a fax manually

Perform the following to send a fax using
panel.
Place a single document face down on the document glass, or load the
1
documents face up into the document feeder (see "Loading originals" on
page 18).
2 Select (fax) on the control panel.
3 Adjust the resolution and the darkness to suit your fax needs (see
"Adjusting the document settings" on page 35).
Samsung
(Stop/Clear) before the
(On Hook Dial) on the control
4 Press (On Hook Dial) on the control panel.
5 Enter a fax number using the number keypad on the control panel.
6 Press (Start) on the control panel when you hear a high-pitched fax
signal from the remote fax machine.

Sending a fax to multiple destinations

You can use the multiple send feature, which allows you to send a fax to multiple
locations. Originals are automatically stored in memory and sent to a remote
station. After transmission, the originals are automatically erased from memory.
You cannot send faxes with this feature if you chosen super fine as an option
or if the fax is in color.
1 Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 18).
Select (fax) on the control panel.
2
Adjust the resolution and the darkness to suit your fax needs (see
3
"Adjusting the document settings" on page 35).
4 Select (Menu) > Fax Feature > Multi Send on the control panel.
2. Menu Overview and Basic Setup
61