Basic Scanning - Samsung Xpress C48x series User Manual

Basic scanning

For special scanning features, refer to the Advanced Guide (see "Scan
features" on page 241).
18
Basic Scanning
This is the normal and usual procedure for scanning originals.
This is a basic scanning method for USB-connected machine.
• It may be necessary to press
some models.
• If you want to scan using the network, refer to the Advanced Guide (see
"Scanning from network connected machine" on page 242).
• C48xW series only support Scan to key on the control panel (see
scanning method" on page 241).
1 Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 50).
C48xW series: Press Scan to > Scan to PC > Local PC on the control
2
panel.
OK to navigate to lower-level menus for
C48xFN/C48xFW series: Select
control panel.
If you see Not Available message, check the port connection, or select
Enable Scan from Device Panel in Samsung Easy Printer Manager >
Advanced Setting > Scan to PC Settings.
3 Select the scan destination you want and press OK.
Default setting is My Documents.
• You can create and save the frequently used settings as a profile list. Also
you can add and delete the profile and save each profile to a different
path.
• To change the
Scan to PC
"Basic
Select the option you want and press OK.
4
Scanning begins.
5
Scanned image is saved in computer's C:\Users\users name\My
Documents. The saved folder may differ, depending on your operating
system or the application you are using.
(scan) > Scan to PC > Local PC on the
Samsung Easy Printer Manager > Advanced Setting >
Settings.
2. Menu Overview and Basic Setup
64