Rear Brake Mount Adapter - Cannondale slice carbon Owner's Manual Supplement

rear brake
mount adapter
To install a rear brake:
1. remove the adapter bolt (1) with a 4mm
allen wrench.
2. lift the brake mount adapter (2) from the
frame.
3. install a serrated washer (3) onto the
brake bolt and mount the brake onto the
adapter.
tighten the brake recessed nut (4) to
the brake manufacturer's recommended
torque.
4. apply grease to adapter bolt threads and
install adapter and brake into frame.
tighten adapter bolt to 7 nm.
Replacement brake mount kit - KP064/
4mm
17
10849.PDF