Touchpad Led Board - HP Pavilion G6 Maintenance And Service Manual

TouchPad LED board

NOTE: The security cable lock is included with the base enclosure, spare part number 637187-001.
TouchPad LED board
Before removing the TouchPad LED board, remove the following components:
1. Battery (see
2.
Service door (see
3.
Hard drive (see
4. Optical drive (see
5. Keyboard (see
6.
Top cover (see
Remove the TouchPad LED board:
1. Position the computer right-side up.
2. Release the ZIF connector (1), and disconnect the LED ZIF cable (2) from the system board.
3. Remove the LED board (3).
Reverse this procedure to install the TouchPad LED board.
Battery on page 46)
Service door on page
Hard drive on page
Optical drive on page
Keyboard on page 55)
Top cover on page 58)
47)
48)
50)
Component replacement procedures
647622-001
63