Toshiba GD-1370 Fax Manual page 120

4.USING N/W-FAX DRIVER (NETWORK FAX)
- [Port Settings] tab in the N/W-Fax driver
 To change the community name, the administrator privilege is necessary. You must log in with
the "Administrator" privilege and open the printer driver properties.
 Up to 31 characters including the following symbols can be entered for the Community Name.
! " # $ % & ' ( ) * + , - / : ; < = > ? @ [ \ ] ^ _ ` { | } ~
3. SNMP V3
If SNMP V3 is enabled, select one of the following items to set how users are authenticated.
User ID File — Select this option when you want to use a user ID file. Click [Browse] and specify the
user ID file.
User Name/Password — Select this option when you want to use the user name and password.
When this option is selected, enter or select the following items:
- User Name
- Authentication Protocol
- Authentication Password
- Privacy Protocol
- Privacy Password
 If you select to enable SNMP V3, consult your network administrator for preliminary advice on
how to authenticate users.
 Up to 31 characters including the following symbols can be entered for each of the User Name,
Authentication Password and Privacy Password.
! $ % & ' ( ) - , < > @ [ ] ^ _ ` { } ~
4. [Restore Default]
Click this to restore the settings to make the equipment as it was at the time of factory shipment.
120 Setting up the N/W-Fax Driver Options