Transmission Report - Toshiba GD-1370 Fax Manual

TRANSMISSION REPORT

0.
Item name
ROM version
TIME
FAX NO.1
FAX NO.2
NAME
NO.
FILE NO.
DATE TIME
DURATION
PGS
TO
DEPT
MODE
STATUS
Firmware version of the FAX Unit and the MFP. This appears at the upper
right of the list.
Date and time of the output of the journal
Sender's fax number (line 1)
Sender's fax number (line 2)
Registered terminal ID
Serial number assigned to each communication (001 to 999)
File number for communication
Start date and time for communication
Communication period (indicated by a "minutes:seconds" form)
Number of original pages transmitted
Communicated destination telephone number or name registered in the
address book.
If the mark is indicated, the 2nd fax number registered in the address
book has been used.
Department code
(If the department control is not performed, this field will become blank.)
Communication mode (2 digits) and transmission method (3 digits) or
special communication mode (2 digits)
If the mark is indicated, the 2nd line has been used.
See the following table for the codes displayed in this field.
Communication result and error code
 OK: Completed successfully
 NG: Completed abnormally
 4-digit error code: Communication failed
For details about the error codes, refer to the Software Troubleshooting
Guide.
Description

TRANSMISSION REPORT 149