Table of Contents
Advertisement
Rinse Aid
To fill the rinse aid compartment
1. Open the rinse aid compartment
by turning and removing the cap as
shown in figure 5.
2. Fill the rinse aid compartment until
the rinse aid indicator goes dark,
as shown in figure 6 (where "a"
indicates the compartment is empty,
and "b" indicates the compartment is
full).
3. Replace the cap, ensuring the
markers on the cap line up with the
compartment prior to screwing the
cap back in place.
Rinse Aid Adjustment
The level of rinse aid use is preset to 3. You can adjust the level of
rinse aid use by adjusting as shown in figure 7.
•
If water stains form on the dishes after a wash, the level should be
increased.
•
If blue stains which can be wiped away are left on the dishes after a
wash, the level should be decreased.
fig. 5
fig. 6
fig. 7
17
Advertisement
Table of Contents
