Selecting A Setting For A User Program - Sharp AL-1651CS Operation Manual

SELECTING A SETTING FOR A USER PROGRAM

1
Press the [MENU] key and then press the
[ENTER] key.
In printer mode, the user programs are accessed
by simply pressing the [MENU] key.
2
Press the [
select the item that you wish to configure
in the USER PROGRAM items, and then
press the [ENTER] key.
• See "USER PROGRAM" (p.64 to p.68)
for the program name and program
code.
• You can also select a program by
directly entering the program number
with the numeric keys.
3
Press the [
change the setting of the selected item.
See "USER PROGRAM" (p.64 to p.68) for the
program code.
• If you mistakenly select the wrong item, press the [CLEAR] key
Note
(
• To cancel a setting for a user program, press the [MENU] key.
4
Press the [ENTER] key.
Your selection appears briefly and then the previous screen appears.
When "AE LEVEL ADJUST" is selected in the user programs and the
Note
[ENTER] key is pressed, the automatic exposure adjustment screen
appears. Adjust the exposure and press the [ENTER] key
] key ( ) or [
] key ( ) or [
) and repeat the procedure from step 2.
] key ( ) to
] key ( ) to
MAIN MENU
1:USER PROGRAM
USER PROGRAM
2:PREHEAT MODE
PREHEAT MODE
1:1 MIN
7
69