Sharp AL-1651CS Operation Manual page 67

Program
Program name
number
AUTO SHUT-OFF
4
TIME
STREAM FEEDING 1: ON
5
6 LAYOUT IN 2IN1
OFFSET
7
FUNCTION
ROTATE ORIG.
8
IMAGE
Setting codes
(factory default
setting appears
in bold)
• This function automatically
1: 5 MIN.
2: 30 MIN.
3: 60 MIN.
4: 120 MIN.
5: 240 MIN.
• When copying using the
2: OFF
• Use this setting to select the
1: PATTERN 1
2: PATTERN 2
• When enabled, this function
1: ON
2: OFF
• When two-sided copying is
1: ON
2: OFF
USER SETTINGS
Explanation
switches the machine to a state
that consumes even less power
than preheat mode if the set
duration of time elapses without
the machine being used when
the power is on. All lights
except the power save indicator
go off. To resume normal
operation, press the [START]
key ( ). Normal operation
also resumes automatically
when a print job is received or
scanning is begun from a
computer. While in auto power
shut-off mode, no keys (except
the [START] key (
used.
RSPF, while "SET
ORIGINALS FOR STREAM
FEEDING." appears in the
display after an original has
been scanned (about 5
seconds), a subsequent
original can be placed and
automatically fed into the
machine.
layout pattern when two
original pages are copied onto
a single sheet of paper (see
page 35 for the layout
patterns).
offsets the position in the
paper output tray of sets of
copies during sort copy or
copy job, and print jobs when
using the printer function.
performed, this function
rotates the image on the back
of the original. This is
convenient when binding the
copies at the top (tablet
binding).
)) can be
7
65