Vivotek FD7131 Quick Installation Manual page 7

Power over Ethernet (PoE)
When using a PoE-enabled switch
The camera is PoE-compliant, allowing transmission of power and data via single Ether-
net cable. See the following illustration to connect the camera to a PoE-enabled switch
via Ethernet cable.
When using a non-PoE switch
Use a PoE power injector (optional) to connect between the camera and a non-PoE
switch.
PoE switch
PoE power injector
(optional)
non-PoE switch
EN - 6