Warning Before Install
Power off the Network Camera as soon as
it is found smoking or smelt unusual.
Contact your distributor when such cases
happen.
Do not place the Network Camera around
the heat sources, such as television or
oven.
Keep the Network Camera away from direct
sunlight.
Do not place the Network Camera on
unsteady surfaces.
Do not disassemble the Network Camera.
Do not insert any object into the Network
Camera, such as needles.
Keep the Network Camera away from the
water. If the Network Camera is wet, power
off immediately.
Contact your distributor when such cases
happen.
Refer to your user's manual for the
operating temperature.
Do not place the Network Camera in high
humid environments.
Do not touch the Network Camera when
it's lightening.
Do not drop the Network Camera.
EN - 1