Connecting External Components - Kenwood DDX6015BT Instruction Manual

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connecting a USB device/iPod/iPhone
iPod nano (7th iPod/iPhone except
Generation)/ for iPod nano (7th
iPod touch (5th Generation)/iPod touch
Generation)/iPhone (5th Generation)/iPhone
5S/iPhone 5C/iPhone 5 5S/iPhone 5C/iPhone 5
(commercially available)
KCA-iP103
(optional accessory)
0.8 m
USB device*
(commercially available)
KCA-iP102
(optional
accessory)
0.8 m
KCA-iP202 (optional accessory)
* Use CA-U1EX for extending the cable if necessary. (Max 500 mA, 5V)
54

Connecting external components

(commercially available)
1 iPod/Audio Video input (AV-IN2)*
2 Video output (Yellow)
3 Rear preout*
• Audio left output (White)
• Audio right output (Red)
0.8 m
4 Front preout*
• Audio left output (White)
• Audio right output (Red)
5 Subwoofer preout (monaural output)*
• Subwoofer left output (White)
1.8 m
• Subwoofer right output (Red)
6 NAVI I/F input
7 Rear view camera input (Yellow)
8 Audio Video input (AV-IN1)*
• Visual input (Yellow)
• Audio left input (White)
• Audio right input (Red)
When connecting the component to play on "AV-IN1"/"AV-
*
1
IN2", use the Audio and Video cable CA-C3AV (optional accessory).
* 2 When connecting the external amplifier, connect its ground wire to
the chassis of the car; otherwise the unit may be damaged.
1
2
2
2
1
Connecting microphone for Bluetooth
(only for DDX6015BT/DDX4015BT/
DDX415BT/DDX415BTM/DDX615WBT/
DDX615WBTM)
Connect the microphone (7) to the MIC terminal.
• To install the microphone, peel off the adhesive
tape, fix on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
7