Elements; Adjusting The Carburetor - Yamaha XMAX 250 YP250R Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
2. Remove the air filter case cover
by removing the screws.
3. Pull the air filter element out.
6
4. Insert a new air filter element into
the air filter case.
5. Install the air filter case cover by
installing the screws.
Cleaning the V-belt case air filter
element
1. Screw (x3)
2. V-Belt air filter case cover
1. Remove the V-belt case air filter
cover by removing the screws.
2. Remove the air filter element, and
then blow out the dirt with com-
pressed air as shown.
6-11
3. Check the air filter element for
damage and replace it if neces-
sary.
4. Install the air filter element with
the colored side facing outward.
5. Install the V-belt case air filter
cover by installing the screws.
CAUTION
Make sure that each filter ele-
ment is properly seated in its
case.
The engine should never be
operated without the filter ele-
ments installed, otherwise the
piston(s) and/or
may become excessively worn.

Adjusting the carburetor

The carburetor is an important part of
the engine and requires very sophisti-
cated adjustment. Therefore, all car-
buretor adjustments should be left to
a Yamaha dealer, who has the neces-
sary professional knowledge and
experience.
ECA10530
cylinder(s)
EAU21300