Removing And Installing Cowlings And Panels; Checking The Spark Plug - Yamaha XMAX 250 YP250R Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Removing and installing
cowlings and panels
The cowlings and panels shown need
to be removed to perform some of the
maintenance jobs described in this
chapter. Refer to this section each
time a cowling or panel needs to be
removed and installed.
Cowling A
To remove the cowling
1
6
1. Screws
Cowling B
Screws
EAU18712 Remove the screws, and then take
the cowling off.
To install the cowling
Place the cowling in the original posi-
tion, and then install the screws.
Panel A
To remove the panel
EAU18790
1. Open the storage compartment.
(See page 3-11.)
1
Screws
2. Remove the screw, and then take
the panel off.
To install the panel
1. Place the panel in the original
position, and then install the
screw.
2. Close the storage compartment.

Checking the spark plug

The spark plug is an important engine
component, which is easy to check.
Since heat and deposits will cause any
spark plug to slowly erode, the spark
EAUM1250
plug should be removed and checked
in accordance with the periodic main-
tenance and lubrication chart. In addi-
tion, the condition of the spark plug
can reveal the condition of the engine.
To remove the spark plug
1. Storage compartment
2. Screws
1. Open the seat. (See page 3-10.)
2. Remove the storage compart-
6-5
1
2
ment under the seat by removing
the bolts.
EAUS1280