Yamaha XMAX 250 YP250R Owner's Manual page 19

Odometer and tripmeter modes
Pushing the "MODE" button switches
the display between the odometer
mode "Total" and the tripmeter
modes "Trip" in the following order:
Total Trip 1 Trip 2
Total
1. Distance
2. Time
3. Average speed
NOTE:
The Trip/fuel odometer is only
activated if the fuel level warning
light comes on.
Pushing the "SET" button when in the
tripmeter mode switches the display
between the different tripmeter func-
tions in the following order:
INSTRUMENT AND CONTROL FUNCTIONS
Distance Time
Distance
Trip/fuel
If the fuel level warning light comes on
(See page 3-2.), the display will auto-
matically change to the fuel reserve
tripmeter mode "Trip/fuel" and start
counting the distance traveled from
that point. In that case, pushing the
"SET" button switches the display
between the various tripmeter and
odometer modes in the following
order:
Trip/Fuel Trip 1
Trip/fuel
To reset a tripmeter, select it by pus-
hing the "MODE" button, and then
push the "SET" button for at least one
second. If you do not reset the fuel
reserve tripmeter manually, it will
Average speed
reset itself automatically and the dis-
play will return to the prior mode after
refueling and traveling 5 km.
Clock mode
To set the clock:
1. When the display is in the "Total"
2. When the hour digits start flas-
Trip 2 Total
3-5
mode, push the "SET" button for
at least two seconds.
hing, push the "SET" button to
set the hours.
3