Features Setup Page - PC Chips M755LMR User Manual

M755LMR Mainboard User's Manual

Features Setup Page

This page sets some of the parameters for peripheral devices
connected to the system.
AMIBIOS SETUP – Features SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
OnBoard Serial PortA
OnBoard IR Port
OnBoard Parallel Port
Parallel Port Mode
Parallel Port IRQ
Parallel Port DMA
OnBoard Game Port
OnBoard MIDI Port
MIDI Port IRQ
OnBoard PCI IDE
Ultra DMA Support
OnChip Audio
OnChip Modem
OnBoard LAN
USB Function
USB Function for DOS
OnBoard FDC
Use this item to enable or disable the onboard
floppy disk drive interface.
OnBoard Serial
Use this item to enable or disable the onboard
PortA
COM1 serial port, and to assign a port address
OnBoard IR Port
Use this item to define the protocol for an
infrared port if you have installed an optional IR
port. The choices are IrDA and ASKIR.
Onboard Parallel
Use this item to enable or disable the onboard
Port
LPT1 parallel port, and to assign a port
address. The Auto setting will detect and
available address.
Parallel Port Mode
Use this item to set the parallel port mode. You
can select SPP (Standard Parallel Port), ECP
(Extended Capabilities Port), EPP (Enhanced
Parallel Port), or ECP + EPP.
Parallel Port IRQ
Use this item to assign either IRQ 5 or 7 to the
parallel port.
Parallel Port DMA
Use this item to assign a DMA channel to the
parallel port. The options are 0, 1 and 3.
34
Enabled
3F8h/COM1
Disabled
378h
Normal
7
N/A
Auto
300h
10
Both
Disabled
Enabled
Enabled
ESC : Quit
Enabled
F1 : Help
Enabled
F5 : Old Values (Shift)F2
Disabled
F6 : Load Optimal values
F7 : Load Best performance values
↑↓←→ : Select Item
PU/PD/+/- : Modify
: Color