Table of Contents
Advertisement
4
or
to Query and press the Menu Select
button directly below Sel for a predefined
message.
5
or
to scroll through the list of messages and
press the Menu Select button directly below Sel
to select the required message.
The message appears on the Compose screen,
with a blinking cursor at the end of it.
6 Use the keypad to edit the message, if required.
7 Press the Menu Select button directly below
Optn.
8
or
to Send Message and press the Menu
Select button directly below Sel.
9 Perform one of the following actions:
•
or
to scroll through the address list and
highlight the required address.
•
or
to [Other Recpnt] and press the
Menu Select button below Edit. A blinking
cursor appears on the Enter Address screen.
Use the keypad to type the address entry.
10 Press the Menu Select button below Send or the
PTT button to send the message.
The display shows the Send Message screen and
Sending msg.
If the message is sent, you hear a tone and the
display shows Msg sent.
If the message is not sent, you hear a low tone,
the display shows Send failed and returns to the
main TMS screen.
Note:
The server responds to your query with the
required report in text messages.
You can append a priority status and/or a
request reply to your message. See
Status and Request Reply of a New Text
Message
on page 101 for more
information.
Receiving a Query
You shall receive the information you have requested
in TMS format.
When you receive a query, you hear a unique, high-
pitched chirp and the display shows the message
Priority
113
English
Advertisement
Table of Contents
