Table of Contents
Advertisement
6 Press the Menu Select button directly below
Optn.
7
or
to Send Message and press the Menu
Select button directly below Sel.
8 Perform one of the following actions:
•
or
to scroll through the address list and
highlight the required address.
•
or
to [Other Recpnt] and press the
Menu Select button below Edit. When a
blinking cursor appears on the Enter Address
screen. Use the keypad to type the address
entry.
9 Press the Menu Select button directly below Send
or press the PTT button to send the message.
The display shows the Send Message screen and
Sending msg.
If the message is sent, you hear a tone and the
display shows Msg sent.
If the message is not sent, you hear a low tone,
the display shows Send failed and returns to the
main TMS screen.
Note:
You can append a priority status and/or a
request reply to your message. See
Status and Request Reply of a New Text
Message
on page 101 for more
information.
Priority Status and Request Reply of a New Text
Message
Before sending your message, you can append a
priority status and/or a request reply to your
message.
Appending a Priority Status to a Text Message
Ensure that an outgoing message is composed to
allow you to perform this procedure. See
and Sending a New Text Message
more information.
Note:
The Priority Status icon on a message does
not imply that the message gets higher priority
over the other messages when it is being
transmitted. It is just an indication that can be
embedded into a message to let the receiver
know that the message is important.
Priority
Composing
on page 99 for
101
English
Advertisement
Table of Contents
