Table of Contents
Advertisement
•
or to RSSI and press the Menu Select
button directly below RSSI.
The display shows momentary the name of the
current site and its corresponding received signal
strength indicator (RSSI).
Changing the Current Site
Perform one of the following actions:
•
Press and hold down the preprogrammed Site
Displ/Srch button.
•
Press and hold down the Menu Select button
directly below RSSI.
You hear a tone and the display shows
momentary Scanning site.
When the radio finds a new site, it returns to the
Home screen.
Mission Critical Wireless - Bluetooth
This feature allows your radio to extend its
functionality by connecting to external proprietary
Motorola accessories.
138
English
The default setting for Bluetooth-enabled radio is
Bluetooth on. See
139 to turn off the Bluetooth.
Currently your radio supports the following Bluetooth
devices or profiles.
•
Headset (HSP)
®
-
•
Dial Up Networking (DUN)
•
Personal Area Networking (PAN)
•
Serial Port (SPP)
Note:
It is recommended to use Motorola proprietary
Mission Critical Wireless (MCW) devices with
APX radios during Mission Critical operations
®
as other Bluetooth
devices may or may not
meet the mission critical standard.
Your radio must be preprogrammed to allow
you to use this feature.
The use of this feature requires the "Full
Feature" expansion board together with the
Bluetooth Software.
Turning Off the Bluetooth
on page
Advertisement
Table of Contents
